Use NANO RTK Like a Surveyor

Posted by DATAGNSS on

Add a range pole and a smartphone clamp to turn your NANO RTK Receiver into a practical, portable field-mapping setup. The antenna sits above the point you want to measure, while your phone becomes the display and data collector.

Complete NANO RTK field setup with GNSS antenna, range pole and smartphone holder

1. What you need

  • NANO RTK Receiver and a compatible GNSS antenna.
  • A range pole with a bubble level and a suitable antenna mount or adapter.
  • A smartphone clamp that fits your phone and pole.
  • A supported mapping app, such as SW Maps or QField.
  • A suitable power source and cables. The receiver can also be powered from your phone via USB.
  • An RTK correction source, such as a compatible NTRIP service or your own base station.

Check the mount, thread sizes and load capacity before assembly. A pole and phone clamp alone do not guarantee mechanical compatibility; use brackets or adapters suited to your hardware.

2. Assemble your field setup

  1. Secure the antenna at the top of the pole, with its center aligned over the pole tip.
  2. Attach the receiver securely using a suitable holder. Do not use the antenna connector or cable as a load-bearing mount.
  3. Clamp your phone at a comfortable viewing height without obstructing the bubble level.
  4. Connect the antenna and power, then secure cables so they cannot snag or pull on connectors.

Close-up of the smartphone clamp and mounting bracket attached to the range pole

3. Connect the phone and RTK corrections

Select NANO as the external GNSS source in your mapping app. Use a connection supported by your receiver version, phone and app. Supported setups can use BLE; Android devices can also use USB with a suitable OTG connection. Do not assume USB compatibility on iPhone or iPad.

Configure your correction source and confirm that correction data is reaching the receiver. Wait for a stable RTK Fixed solution before collecting precision points.

Smartphone displaying GNSS positioning status while mounted on the NANO RTK range pole setup

4. Collect points like a surveyor

  1. Place the pole tip on the point to be recorded.
  2. Hold the pole vertical using the bubble level.
  3. Check the antenna-height setting, coordinate system and height reference required by your workflow. Include the mount or adapter in the height measurement, and follow the app's antenna-height convention.
  4. Confirm the solution remains stable, then record the point and its description.
  5. Review the data and export it in a format supported by your app.

5. Small details that matter

  • Choose open sky where possible and keep the antenna away from nearby obstructions and reflective surfaces.
  • Keep the pole vertical. This setup does not assume automatic tilt compensation.
  • Recheck antenna height whenever you change pole length or mounting hardware.

A simple way to take NANO into the field

The range pole provides repeatable positioning over a point, and the phone clamp keeps your screen accessible. Together with NANO RTK, suitable software and correction data, they form a compact setup for GIS data collection and field testing.

Explore NANO RTK Receiver | Connection and setup guide


Share this post



← Older Post